Knew Concepts 5” Mk.IV Heavy Duty Fret Saw With Lever Tension And Swivel Blade Clamps

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

Designed to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.

The Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.

The Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.

SKU:	124.005CS
UPC:	196943890034
Brand:	Knew Concepts
MPN:	124.005CS
Made In:	United States

---

Micro-Tools makes every attempt to provide accurate information for each item. Actual packaging and/or specifications may be slightly different from the information and picture provided.

Knew Concepts Saw - Mark IV Heavy Duty Lever Tension 8 inch

Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented fret and coping saws. These saws are perfect for jewelers, luthiers, model builders and fine woodworkers, These saws excel when performing fine scroll saw work and when removing the waste between hand cut dovetails. These saws are made from 1/8 thick milled aluminum with a red anodized finish.

Knew Concepts 5” Mk.III Fret Saw with Screw Tension

Pégas Super Skip Tooth 5” Pack of 12 Size 7 Woodworking Sawblades

Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented coping saws. These saws are perfect for luthiers, model builders and fine woodworkers, These saws excel when performing fine coping work and when removing the waste between hand cut dovetails. These saws are made from 3/16 thick milled aluminum with a red baked on power coat finish.

Knew Concepts 125.012 MK IV 6.5 Cam Lever Rotating Blade Coping Saw with 12 Each 18 TPI Pegas Fret Saw Blades (DCE)

Knew Concepts Mk.4 Heavy Duty Fret Saw With Lever Tension And

Qbit SQ1000-S Power Oscillating Multi-Tool – Josar Supply

Knew Concepts 3 Titanium Birdcage Fret Saw with Lever Tension

Designed to swing the rear of the frame out of the way. The ability to set the frame into a neutral corner frees you to saw into areas that were

Knew Concepts 5 Fret Saw with Lever Tension and Swivel Blade Clamps

Knew Concepts Fret Saws

Knew Concepts Saw - Mark III Lever Tension

Knew Concepts 8 Mk.IV Heavy Duty Fret Saw with Lever Tension and Swiv

Collins Tool Company Tread Template – Josar Supply

Knew Concepts Coping/Fret Saw - Hand Tools - Wood Talk Online

Knew Concepts Mk.4 Die Saw 203mm/8 Deep With 2 Dovetail